Jeep RENEGADE 2023, Быстрое руководство

Страница: 35 / 52

33
Repair procedure
Proceed as follows:

take the kit, detach the speed limit
sticker (I) fig. 44 and apply it in a clearly
visible position fig. 46

open the cap on the compressor,
engage the cartridge and turn a quarter
turn clockwise, fig. 47

remove the cap from the tyre valve and
screw the black compressor tube onto
the valve
46 J0A5088
47 J0A5089

make sure that the ON/OFF button is in
the off position (button in position 0)

insert the electrical connector fig. 48
into the 12V socket on the car

activate the compressor setting the ON-
OFF button, fig. 49, to the on position
(button in position I)
48 J0A5090
49 J0A5091

When the prescribed pressure
indicated in the Owner Handbook
(“Wheels” chapter, section “Technical
Specifications”) or on the specific label
appears on the pressure gauge, turn off
the compressor by moving the button to
the OFF position (O)
50 J0A5092
If the pressure gauge indicates a pressure
lower than 2.0 bar / 29 psi within 10
minutes of starting the compressor,
turn off the compressor, disconnect the
black compressor tube from the tyre
valve, unscrew the cartridge from the
compressor by turning it a quarter turn
anticlockwise and lift it out. Move the car
by approximately 10 metres to allow the
distribution of the sealant.
51 J0A5093