Jeep KJ Liberty 2005, Руководство по обслуживанию

Страница: 47 / 56

Symptom:
TCM MESSAGES NOT RECEIVED
When Monitored and Set Condition:
TCM MESSAGES NOT RECEIVED
When Monitored: Ignition On - Continuously
Set Condition: When the ABM detects the TCM is not connected or not functioning
correctly for 10 seconds.
POSSIBLE CAUSES
ATTEMPT TO COMMUNICATE WITH THE TCM
TRANSMISSION CONTROL MODULE
TEST ACTION APPLICABILITY
1 Turn the ignition on.
With the DRB, enter Transmission.
Was the DRB able to I/D or communicate with the TCM? All
Yes
→
Go To 2
No
→
Refer to the Communication category for the related symptom(s).
Perform BODY VERIFICATION TEST - VER 1.
2 With the DRB, erase DTC’s.
Turn the ignition on and wait approximately 1 minute.
With the DRB, read DTC’s.
Did this DTC reset? All
Yes
→
Replace the Transmission Control Module in accordance with the
service information.
Perform BODY VERIFICATION TEST - VER 1.
No
→
Test Complete.
45
BRAKES (25E)