Jeep KJ Liberty 2005, Руководство по обслуживанию

Страница: 18 / 56

TEST ACTION APPLICABILITY
3 Turn the ignition off.
Turn the ignition on.
With the DRBIII
t
, record and erase DTC’s.
NOTE: If you have other DTCs, repair other DTCs first before continuing.
Turn the ignition off.
Remove ABS Valve fuse.
Perform the Key-on Bulb Check.
Does the ABS, Brake, and TCS (if equipped) Indicators remain on after the 4 second
bulb check?
All
Yes
→
Reinstall the ABS Valve fuse. With the DRBIII
t
, erase Instru-
ment Cluster DTCs. Test Complete.
Perform ABS VERIFICATION TEST - VER 1.
No
→
Go To 4
4 Reinstall the ABS Valve fuse, if removed.
Turn the ignition off.
Turn the ignition to RUN.
Perform the Instrument Cluster self test.
NOTE: Refer to Body information for the related test(s).
Did the indicators illuminate during the Instrument Cluster self test? All
Yes
→
Replace the Anti-Lock Brake module in accordance with the
Service Information.
Perform ABS VERIFICATION TEST - VER 1.
No
→
Go To 5
5 Turn the ignition off.
Turn the ignition to RUN.
Perform the Instrument Cluster self test.
NOTE: Refer to Body information for the related test(s).
Do the indicators turn on for 4 seconds, shut off for 5-10 seconds then illuminate? All
Yes
→
Test Complete.
No
→
Ensure the ABS indicator bulb is installed or good in the Instru-
ment Cluster. If verified working, replace the Instrument Cluster
in accordance with the Service Information.
Perform ABS VERIFICATION TEST - VER 1.
16
BRAKES (25E)
INSTRUMENT CLUSTER BULB —
Continued