Jeep Grand Cherokee, Руководство по эксплуатации

Страница: 97 / 315

You can signal a lane change by moving the
lever upward or downward partially without
moving beyond the detent.
If either turn signal indicator has a very fast
flash rate, check for a defective outside light
bulb. If an indicator fails to light when the lever
is moved, see your authorized dealer for ser-
vice.
Lane Change Assist
Tap the lever up or down once, without moving
beyond the detent, and the turn signal (right or
left) will flash three times then automatically turn
off.
High/Low Beam Switch
Push the multifunction lever away from you to
switch the headlights to high beam. Pull the
multifunction lever toward you, to switch the
headlights back to low beam.
Flash-To-Pass
You can signal another vehicle with your head-
lights by lightly pulling the multifunction lever
toward you. This will turn on the high beam
headlights until the lever is released.
NOTE:
If the multifunction lever is held in the flash-
to-pass position for more than 15 seconds,
the high beams will shut off.
Instrument Panel Dimmer
Rotate the center portion of the lever to the
extreme bottom position to fully dim the instru-
ment panel lights and prevent the interior lights
from illuminating when a door is opened.
Rotate the center portion of the lever up to
increase the brightness of the instrument panel
lights when the parking lights or headlights are
on.
Rotate the center portion of the lever upward to
the next detent position to brighten the odom-
eter and radio when the parking lights or head-
lights are on.
Rotate the center portion of the lever upward to
the last detent to turn on the interior lighting.
Turn Signal Control
Dimmer Control
93