Jeep Grand Cherokee, Руководство по эксплуатации

Страница: 91 / 315

contains desired position settings for the driver
seat and side mirrors and a set of desired radio
station presets.
The memory switch is located on the instrument
panel to the left of the steering column. The
switch contains a S (SET) button to activate the
memory save function. It also contains a rocker
switch labeled with the number (1) and the
number (2). The rocker switch allows the driver
to recall either of the two pre-programmed
memory profiles by pressing the appropriate
side of the switch.
Programming The Memory Feature
To create a new memory profile, perform the
following:
NOTE:
Saving a new memory profile will erase an
existing profile from memory.
1. Turn the ignition ON.
2. Adjust all memory profile settings to desired
preferences (i.e., seat, side mirror and radio
station presets).
3. Press and release the SET button on the
memory switch, then press the side of the
rocker switch labeled (1) within five seconds.
The Electronic Vehicle Information Center
(EVIC), if equipped, will display which memory
position is being set.
If desired, a second memory profile can be
stored into memory as follows:
1. Turn the ignition ON.
2. Adjust all memory profile settings to desired
preferences (i.e., seat, side mirror and radio
station presets).
3. Press and release the SET button on the
memory switch, then press the side of the
rocker switch labeled (2) within five seconds.
The EVIC, if equipped, will display which
memory position is being set.
NOTE:
•
For vehicles equipped with an automatic
transmission, memory profiles can be set
without the vehicle in PARK, but the ve-
hicle must be in PARK to recall a memory
profile.
•
For vehicles equipped with a manual
transmission, the vehicle speed must be
at 0 mph (0 km/h) to recall a memory
profile.
•
The Recall Memory with Remote Key Un-
lock feature can be turned on and off
through the EVIC, if equipped. Refer to
“Electronic Vehicle Information Center
(EVIC)/Customer-Programmable
Fea-
tures” in “Understanding Your Instrument
Panel” for further information.
Driver Memory Switch
87