Jeep Grand Cherokee, Руководство по эксплуатации

Страница: 27 / 315

Programmable Features)” in “Understanding
Your Instrument Panel” for further information.
Auto Up Feature With Anti-Pinch
Protection — If Equipped
On some models, the driver’s and front passen-
ger’s (if equipped for passenger side) power
window switches have an “Auto Up” feature.
Pull the window switch fully upward to the
second detent, release, and the window will go
up automatically.
To stop the window from going all the way up
during the Auto Up operation, push down on
the switch briefly.
To close the window part way, pull the window
switch up to the first detent and release when
you want the window to stop.
For vehicles not equipped with the Electronic
Vehicle Information Center (EVIC), the power
window switches will remain active for 45 sec-
onds after the ignition switch is turned to the
LOCK position. Opening either front door will
cancel this feature.
For vehicles equipped with the EVIC, the power
window switches will remain active for up to
10 minutes after the ignition switch is turned to
the LOCK position. Opening either front door
will cancel this feature. The time is program-
mable. Refer to “Electronic Vehicle Information
Center (EVIC)/Personal Settings (Customer-
Programmable Features)” in “Understanding
Your Instrument Panel” for further information.
NOTE:
•
If the window runs into any obstacle dur-
ing auto-closure, it will reverse direction
and then go back down. Remove the ob-
stacle and use the window switch again to
close the window.
•
Any impact due to rough road conditions
may trigger the auto reverse function un-
expectedly during auto-closure. If this
happens, pull the switch lightly to the first
detent and hold to close window manu-
ally.
WARNING!
There is no anti-pinch protection when the
window is almost closed. Be sure to clear all
objects from the window before closing.
Reset
It may be necessary at some point in time to
reactivate the Auto Up feature. To do so, per-
form the following procedure:
1. Pull the window switch up to close the
window completely and continue to hold the
switch up for an additional two seconds after
the window is closed.
2. Push the window switch down firmly to the
second detent to open the window completely
and continue to hold the switch down for an
additional two seconds after the window is fully
open.
23