Jeep GRAND CHEROKEE 2023, Руководство пользователя

Страница: 232 / 394

SAFETY 231
SSC has three states:
1. Off (feature is not enabled and will not activate)
2. Enabled (feature is enabled and ready but activation
conditions are not met, or driver is actively overriding
with brake or throttle application)
3. Active (feature is enabled and actively controlling
vehicle speed)
Enabling SSC
SSC is enabled by pushing the SSC switch, but the
following conditions must also be met to enable SSC:

The driveline is in 4WD Low.

The vehicle speed is below 5 mph (8 km/h).

The parking brake is released.
 The driver is not applying throttle.

The driver door is closed (If doors are attached, the
door must be closed. If doors are detached, then driver
seat belt must be buckled).
Activating SSC
Once SSC is enabled it will activate automatically once the
following conditions are met:

The driver releases the throttle.

The driver releases the brake.
 The transmission is in any selection other than PARK.
 Your vehicle speed is below 20 mph (32 km/h).

The driver door is closed (If doors are attached, the
door must be closed. If doors are detached, then driver
seat belt must be buckled).
The set speed for SSC is selectable by the driver, and can
be adjusted by using the gear shift +/-. Additionally, the
SSC set speed may be reduced when climbing a grade and
the level of set speed reduction depends on the
magnitude of grade. The following summarizes the SSC
set speeds:
SSC Target Set Speeds

1st = 0.6 mph (1 km/h)

2nd = 1.2 mph (2 km/h)
 3rd = 1.8 mph (3 km/h)
 4th = 2.5 mph (4 km/h)

5th = 3.1 mph (5 km/h)

6th = 3.7 mph (6 km/h)
 7th = 4.3 mph (7 km/h)
 8th = 5 mph (8 km/h)

9th = 5.6 mph (9 km/h) — if equipped

REVERSE = 0.6 mph (1 km/h)
 NEUTRAL = 1.2 mph (2 km/h)
 PARK = SSC remains enabled but not active
23_W7_OM_EN_IN_t.book Page 231