Jeep Compass 2023, Руководство пользователя

Страница: 24 / 304

22 GETTING TO KNOW YOUR VEHICLE
Frequency Operated Button Integrated Key (FOBIK-Safe)
To minimize the possibility of unintentionally locking a
Passive Entry key fob inside your vehicle, the Passive Entry
system is equipped with an automatic door unlock feature
which will function if the ignition switch is in the OFF
position.
There are three situations that trigger a FOBIK-Safe search
in any Passive Entry vehicle:

A lock request is made by a valid Passive Entry key fob
while a door is open.

A lock request is made by the Passive Entry door
handle while a door is open.

A lock request is made by the door panel switch while
the door is open.
When any of these situations occur, after all open doors are
shut, the FOBIK-Safe search will be executed. If it detects a
Passive Entry key fob inside the vehicle and it does not
detect any Passive Entry key fobs outside the vehicle, then
the vehicle will unlock and alert the customer.
NOTE:
The vehicle will only unlock the doors when a valid Passive
Entry key fob is detected inside the vehicle. The vehicle will
not unlock the doors when any of the following conditions
are true:

The doors are manually locked using the door lock
knobs.

Three attempts are made to lock the doors using the
door panel switch and then the doors are closed.

There is a valid Passive Entry key fob outside the
vehicle and within 5 ft (1.5 m) of either Passive Entry
door handle.
To Lock The Vehicle’s Doors And Liftgate
With one of the vehicle’s Passive Entry key fobs within
5 ft (1.5 m) of either front door handle, push the Passive
Entry lock button located on the outside door handle to
lock the vehicle doors and liftgate.
Push The Door Handle Button To Lock
NOTE:
DO NOT grab the door handle when pushing the door
handle lock button. This could unlock the door(s).
DO NOT Grab The Door Handle When Locking
NOTE:

After pushing the door handle button, you must wait
two seconds before you can lock or unlock the doors,
using either Passive Entry door handle. This is done to
allow you to check if the vehicle is locked by pulling the
door handle without the vehicle unlocking.
 If Passive Entry is disabled using the Uconnect
settings, the key fob protection described in
"Frequency Operated Button Integrated Key
(FOBIK-Safe)" remains active/functional.

The Passive Entry system will not operate if the key fob
battery is depleted.
23_MP_OM_EN_USC_t.book Page 22