Jeep Cherokee 2009, Руководство по эксплуатации

Страница: 112 / 223

1. Turn the ignition switch ON.
2. Press and hold the COMPASS button for ap-
proximately two seconds.
3. Press the SCROLL button until “Compass Vari-
ance” message and the last variance zone num-
ber displays in the EVIC.
4. Press and release FUNCTION SELECT button
until the proper variance zone is selected accord-
ing to the map.
5. Press and release the COMPASS button to exit.
Telephone (UConnect
!
) — If Equipped
Press and release the MENU button until “Tele-
phone” displays in the EVIC.
When the appropriate conditions exist, the EVIC
provides the following telephone information:
•
Phone status: idle, voice mail, roaming, battery
strength, and signal strength in increments of
20 percent.
•
Call status: Incoming call, connecting, con-
nected, airtime in minutes and seconds, call
ended, call failed, roaming, and no phone
connection.
•
UConnect
!
Active.
•
Caller ID phone number display.
When the appropriate conditions exist, and if
supported by the cell phone, the EVIC will display
the following telephone symbols:
The EVIC displays this symbol to
indicate the signal strength of the
UConnect
!
phone. The number of
horizontal bars increases as the
strength of the UConnect
!
phone
signal increases.
The EVIC displays this symbol to in-
dicate an incoming call.
The EVIC displays this symbol to in-
dicate that the UConnect
!
phone is
currently in analog mode.
The EVIC displays this symbol to in-
dicate that the UConnect
!
phone is
currently roaming.
The EVIC displays this symbol to in-
dicate that you have voice mail.
The EVIC displays this symbol to
indicate a text message.
The EVIC displays this symbol to in-
dicate the battery strength of the
UConnect
!
phone.
The EVIC displays this symbol to in-
dicate that a phone connection has
been made.
Signal
Strength
Incoming
Call
Analog
Roaming
Voice Mail
Text
Message
Battery
Strength
Call in
Progress
109