Jeep 2017 PATRIOT, Руководство пользователя

Страница: 92 / 252

4. When the seat belt is long enough to fit,
insert the mini-latch plate into the mini-
buckle until you hear a “click.”
5. Sit back in seat. Slide the regular latch plate
up the webbing as far as necessary to allow
the seat belt to go around your lap.
6. When the seat belt is long enough to fit,
insert the latch plate into the buckle until
you hear a “click.”
7. Position the lap belt so that it is snug and
lies low across your hips, below your ab-
domen. To remove slack in the lap belt
portion, pull up on the shoulder belt. To
loosen the lap belt if it is too tight, pull on
the lap belt. A snug seat belt reduces the
risk of sliding under the seat belt in a
collision.
8. Position the shoulder belt on your chest so
that it is comfortable and not resting on
your neck. The retractor will withdraw any
slack in the seat belt.
9. To release the seat belt, push the red
button on the buckle.
10. To disengage the mini-latch plate from
the mini-buckle for storage, insert the
regular latch plate into the black button
on the top of the mini-buckle. The seat
belt will automatically retract to its
stowed position. If necessary, slide the
latch plate down the webbing to allow
the seat belt to retract fully. Insert the
mini-latch plate and regular latch plate
into its stowed position.
Mini-Latch Plate Buckled
Rear Center Seat Belt Buckled
Detaching Mini-Latch And Buckle
SAFETY
90