Jeep 2017 PATRIOT, Руководство пользователя

Страница: 224 / 252

ers. Your connected device must be
Bluetooth-compatible, and paired with your
radio (see Uconnect Phone for pairing in-
structions).
Non-Touchscreen Radios: Push the “AUX”
button on the radio faceplate until “BT” or
“Audio Streaming” is displayed on the radio
screen.
Touchscreen-Radios: Push the RADIO/MEDIA
or MEDIA button on the faceplate and then
press the “AUX” button on the touchscreen.
UCONNECT PHONE
The Uconnect Phone is a voice-activated,
hands-free, in-vehicle communications sys-
tem with Voice Command Capability that al-
lows you to dial a phone number with your
mobile phone using simple voice commands
(see Voice Command section).
• To determine if your vehicle is equipped
with Uconnect Phone, push the
“Uconnect Phone” button located
on the radio faceplate. If your vehicle has
this feature, you will hear a voice prompt.
If not, you will see a message on the radio
“Uconnect Phone not available.”
NOTE:
To access the tutorial, push the “Uconnect
Phone” button
. After the BEEP, say
“tutorial.” Push any button on the faceplate,
or press any button on the touchscreen, to
cancel the tutorial.
• Refer to “Uconnect Phone” in “Multime-
dia” in your Owner's Manual on
www.jeep.com/en/owners/manuals for fur-
ther details.
NOTE:
The Uconnect Phone requires a mobile
phone equipped with the Bluetooth Hands-
Free Profile, Version 1.0 or higher. For
Uconnect Customer Support: U.S. residents -
visit
UconnectPhone.com or call
1-877-855-8400. Canadian residents - visit
UconnectPhone.com
or call,
1-800-465-2001 (English) or
1-800-387-9983 (French). This site will
provide specific instructions based on the
type of mobile phone being paired.
Phone Pairing
NOTE:
Pairing is a one - time initial setup before
using the phone. Prior to starting the pairing
procedure ensure all additional phones
within the vehicle have their Bluetooth dis-
abled.
1. Activate Bluetooth on the mobile phone
you are pairing.
2. Push the “Phone” button.
3. Wait for the “ready” prompt and BEEP.
4. After the BEEP, say ”setup” or “Uconnect
device setup.”
Bluetooth Streaming Audio
MUL
TIMEDIA
222