a solid white oval insignia (3) with 433 printed in the center. The sensors are
identical except for the oval insignia. The 433 MHz sensors can either have a
black or grey sensor body.
The TPM sensors are designed for original style factory wheels. It is not
recommended to install a tire pressure sensor in an aftermarket wheel (This could
cause sealing and system performance issues).
Do not attempt to install a tire
pressure sensor in an aftermarket wheel. If aftermarket wheels are installed
and do not contain tire pressure sensors, the system will not function
properly and the driver will be continuously notified of a system
malfunction.
1 - ANTENNA STRAP
2 - VALVE STEM
3 - IDENTIFICATION INSIGNIA
CAUTION: Although 315 MHz and 433 MHz sensors are
identical in size and shape, they are not
interchangeable. Always make sure the correct
sensor is being used.
NOTE:
Sensors may be identified by valve stem cap color. From
the factory, 315 MHz sensors have a gray valve stem cap
while 433 MHz sensors have a black valve stem cap.
Otherwise, once mounted inside a tire and wheel
assembly you are not able to visually tell the difference
between a 315 MHz and 433 MHz sensor. At that point, the
TPM-RKE Analyzer, Special Tool 9936, with the Scan Tool
may be used to identify the sensor frequency or the tire
can be dismounted allowing visual inspection of the
sensor body.
2014 Jeep Patriot Limited
2014 SUSPENSION Tires & Wheels - Service Information - Compass & Patriot
Tuesday, July 19, 2016 10:01:58 AM
Page 23
23
