When HDC is enabled, the HDC icon will be
illuminated in the instrument cluster. HDC will
automatically apply the brakes to control down-
hill speed to the selected level when necessary
on grades greater than approximately 8%. It will
usually not activate on level ground.
The HDC speed may be adjusted by the driver
to suit the driving conditions. The speed corre-
sponds to the transmission gear selected.
HDC operation can be overridden with brake
application to slow the vehicle down below the
HDC control speed. Conversely, if more speed
is desired during HDC control, the accelerator
pedal will increase vehicle speed in the usual
manner. When either the brake or the accelera-
tor is released, HDC will control the vehicle back
to the original set speed.
HDC Operation In 4WD Low Range
To enable HDC, press the HDC switch or put the
Selec-Terrain™ system in the “ROCK” mode. The
HDC icon will be illuminated in the instrument
cluster and HDC will function. If the vehicle speed
goes above 20 mph (32 km/h), the HDC icon will
flash and HDC will not function. To disable HDC,
press the HDC switch.
4WD Low Range Set Speeds
•
1st = 1 mph (1.6 km/h)
•
2nd = 2.5 mph (4 km/h)
•
3rd = 4 mph (6 km/h)
•
4th = 5.5 mph (9 km/h)
•
5th, 6th or D (Drive) = 7.5 mph (12 km/h)
•
REVERSE = 1 mph (1.6 km/h)
•
NEUTRAL = 2.5 mph (4 km/h)
•
PARK = HDC will not function
HDC is intended for low speed off-road driv-
ing only. At vehicle speeds above 20 mph
(32 km/h), HDC will no longer function. When
the vehicle speed drops below 20 mph
(32 km/h), HDC function will automatically re-
sume and the vehicle speed will return to the
chosen set speed.
WARNING!
HDC is only intended to assist the driver in
controlling vehicle speed when descending
hills. The driver must remain attentive to the
driving conditions and is responsible for
maintaining a safe vehicle speed.
ESC Activation/Malfunction Indicator
Light And ESC OFF Indicator Light
The “ESC Activation/Malfunction Indi-
cator Light” in the instrument cluster
will come on when the ignition switch
is turned to the ON position. It should
go out with the engine running. If the
“ESC Activation/Malfunction Indicator
Light” comes on continuously with the engine run-
ning, a malfunction has been detected in the ESC
system. If this light remains on after several ignition
cycles, and the vehicle has been driven several
miles (kilometers) at speeds greater than 30 mph
(48 km/h), see your authorized dealer as soon as
possible to have the problem diagnosed and
corrected.
258
Содержание 2013 Grand Cherokee
