Jeep 2008 Liberty Скачать руководство пользователя страница 110

Страница: 110 / 493

•

You can also press the “Voice Recognition” button
anytime while the list is being played, and then choose
the phone you wish to delete.

Things You Should Know About Your UConnect

System

UConnect

Tutorial

To hear a brief tutorial of the system features, press the
“Phone” button and say “UConnect

Tutorial.”

Voice Training
For users experiencing difficulty with the system recog-
nizing their voice commands or numbers, the UConnect

system Voice Training feature may be used. To enter this
training mode, follow one of the two procedures:

From outside the UConnect

mode (e.g. from radio

mode)

•

Press and hold the “Voice Recognition” button for 5
seconds until the session begins, or,

•

Press the “Voice Recognition” button and say

Setup,

Voice Training

command.

Repeat the words and phrases when prompted by the
UConnect

system. For best results, the Voice Training

session should be completed when the vehicle is parked,
engine running, all windows closed, and the blower fan
switched off.

This procedure may be repeated with a new user. The
system will adapt to the last trained voice only.

To restore the Voice Recognition system to factory default
settings, enter the Voice Training session via the above
procedure and follow the prompts.

Voice Recognition (VR)

•

For best performance, adjust the rear view mirror to
provide at least

⁄

inch (1 cm) gap between the

overhead console (if equipped) and the mirror.

110

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Содержание 2008 Liberty














































































































































































































































































































































































































































































































Результаты поиска

Содержание 2008 Liberty

Отзывы:

Бренды по названию

Популярные бренды

Jeep 2008 Liberty, Руководство пользователя

Результаты поиска

Содержание 2008 Liberty

Отзывы:

Бренды по названию

Популярные бренды