Jeanneau SUN ODYSSEY 469 Скачать руководство пользователя страница 38

Страница: 38 / 120

- 38 -

5.8 GENOA FURLER

Operation

- Leave several turns of the furling line around the drum.

- Furl/unfurl the genoa slowly so that the furling line is always under light tension thus avoiding
any riding turns in the drum.

- Never slacken the genoa halyard when furling/unfurling the sail.

- When furling in light winds, it is recommended to keep the sheet under slight tension so that
the genoa furls correctly.

Maintenance

- Rinse the furling drum regularly.

- It is recommended to rinse mechanical parts at least once a year in fresh water.

5.9 SINGLE LINE FURLER

The jib furler differs from roller reefing gear by its use: The foresail is either completely furled
or fully out. It is not possible to sail by reducing the sail plan as can be done with roller reefing
gear.

Maintenance

- Rinse the drum regularly.

- It is recommended to rinse mechanical parts at least once a year in fresh water.

Refer to the manufacturer's instructions for use and maintenance.

Содержание SUN ODYSSEY 469

























































































































Результаты поиска

Содержание SUN ODYSSEY 469

Отзывы:

Jeanneau SUN ODYSSEY 469, Руководство пользователя, Страница: 38 / 120

Результаты поиска

Содержание SUN ODYSSEY 469

Отзывы: