Jeanneau SUN ODYSSEY 469 Скачать руководство пользователя страница 108

Страница: 108 / 120

- 108 -

Manual control of the air-conditioning

1. Data display

Screen which displays the desired temperature, the programmed values and the error
messages.

2. MODE

Enables you to navigate between the different operating modes.

3. POWER/OFF

Comes on when the system is switched off. The manual ventilator may continue to run.

4. COOL

Indicates that the compressor is activated when cooling.

5. HEAT

Indicates that the compressor is activated when heating.

6. Optional equipment (Auxiliary heating).

7. AUTOMATIC

Comes on when the system is in AUTO mode.

8. DEHUMIDIFY

Comes on when the system is in dehumidifying mode.

9. Keys + and -

Allow you to raise or lower the desired temperature.

10. Cooling indicator

This indicates that the compressor is in COOLING mode.

11. Heating indicator

This indicates that the compressor is in HEATING mode.

12. Optional equipment (Auxiliary heating).

13. temperature control indicator

This indicates the temperature control adjustment (the desired ambient temperature).

14. Indicator for the manual ventilator

This comes on when the manual ventilator is running.

Содержание SUN ODYSSEY 469

























































































































Результаты поиска

Содержание SUN ODYSSEY 469

Отзывы:

Jeanneau SUN ODYSSEY 469, Руководство пользователя, Страница: 108 / 120

Результаты поиска

Содержание SUN ODYSSEY 469

Отзывы: