background image

R E M O V I N G   T H E   W A T C H

Warning!

 

To remove your watch from the winder, move the lever to 

the Stop position and ensure that the mechanism is disengaged from 

the winding crown. 

If you want your watch to be fully wound before removing it, shift 

the lever to Stop and then to Start. It will then take about 30 seconds 

to wind your watch fully. Don’t forget to move the lever to Stop 

before attempting to remove your watch.

W I N D I N G   S Y S T E M   B A T T E R I E S

The winding motor is powered by 

two 1.5V LR14 batteries (Type C)

They last for about a year. When their power is low, a light comes 

on above the Start/Stop lever at the back of the winding motor. 

The batteries should then be replaced as soon as possible and within 

a month. Therefore, it is important to check the batteries 

every month.

C H A N G I N G   T H E   W I N D I N G   S Y S T E M   B A T T E R I E S

Warning!

 

Remove your watch from the soundboard before changing 

the batteries. Place the tray on its end to access its underside. Unscrew 

the two caps of the battery housings. Replace the used batteries, 

making sure that the new batteries are inserted the correct way with 

the + against the caps. Screw back the caps and lay the tray flat.

T A K I N G   C A R E   O F   Y O U R   W A T C H 

The Shabaka watch is designed for daily wear and to run 

continuously. 

However, it is not suitable for any activity that might

subject it to violent shocks.

 Like any high-precision machinery, the 

movement of the watch needs regular cleaning, oiling and adjusting. 

We recommend you have it serviced every three years to ensure its

indefinite operation and lasting value.

The Shabaka watch can only be serviced or repaired in the workshops 

of Christophe Claret SA. Intervention on the watch by any other 

person will invalidate Jean Dunand’s guarantee. 

If your watch needs service or repair, please return it to the 

authorized retailer where you bought it or to WPW S.A. in Geneva, 

with its valid warranty certificate. If you send your watch by post 

or courier, please ensure it is securely packaged, fully insured, 

and accompanied by its warranty certificate.

8

Содержание Shabaka









Отзывы: