03
Preparation
- While operating the machine, always wear substantial
footwear and long trousers.
- Do not wear loose clothing or jewellery that can be drawn
into the air inlet. Keep long hair away from the air inlets.
- Wear protective goggles while operating
- To prevent dust irritation the wearing of a face mask is
recommended
- Never operate the machine with defective guards or
shields, or without safety devices, for example debris
collector in place
Operation
Disconnect the machine from the battery pack
- Whenever you leave the machine,
- Before clearing a blockage,
- Before checking, cleaning or working on the machine,
- if the machine starts to vibrate abnormally.
- Operate the machine only in daylight or in good artificial
light.
- Do not overreach and keep your balance at all times.
- Always be sure of your footing on slopes.
- Walk, never run.
- Keep all cooling air inlets clear of debris.
- Never blow debris in the direction of bystanders.
- We recommend to operate the machine only at reasonable
hours – not early in the morning or late at night when people
might be disturbed.
- We recommend to use rakes and brooms to loosen debris
before blowing/vacuuming;
– We recommend to slightly dampen surfaces in dusty
conditions or use mister attachment;
– We recommend to use the full blower nozzle extension so
the air stream can work close to the ground
