background image

12

NOTE! It can not be charged if charging the battery immediately 

after using the machine. The battery pack should be cooling for 

a period of time. The LED from green to red means it can be 

charged.

- The battery pack will be fully charged in about 4 hours. And the 

LED lights green again to tell you that the battery pack is fully 

charged.

To Remove or Install Battery Pack

- Always move the Main switch to the OFF position before insertion 

or removal of the battery pack.

- To remove the battery pack, withdraw it from the tool while pulling 

the Battery Release Button down.

- To insert the battery pack, groove along the handle and insert in 

the full position, until the Battery Release Button bounce back to 

normal position again.

Starting/Stopping Leaf Blower

Starting:

Move the Main switch to the “I” ON position. 

Stopping:

Move the Main switch to the “O” OFF position.

Using The Leaf Blower

The blower is intended for residential use only. Use the blower 

outdoors to move debris from hard surfaces. This blower is not 

designed to clear leaves from large grassy areas, or move wet, 

heavy debris.

User Tips

- Hold the blow tube approx. 15-20 cm above the ground when 

operating the tool. Use a sweeping motion from side to side. 

Advance slowly keeping the accumulated debris/leaves in front of 

you.

Содержание ZQ561


















Отзывы: