JDW MM347, Инструкция по эксплуатации

Страница: 7 / 10

06
5. G-sensor
The device built-in G-sensor, if there is a serious vehicle
collision the device will lock the video file which starts 10
seconds before the accident and end 2/3/5 minutes after the
accident, meanwhile the bottom right corner will display the
lock icon. The locked video will be saved as a special file
which won’t be covered by cycle recording.
Note: The locked video file name ZWXXXX, general video
name AWXXXX. G-sensor supports sensitivity adjustment,
can be set according to actual demand.
6. Date and time set
In standby mode, short press the menu button to enter into
the system setting menu. Short press the UP/DOWN and
move the cursor to make a date/time setting, then short
press OK to confirm the setting.
Note: In order to correctly record the date and time of any
accident, please set the correct date and time before using
this device.
7. Flash Disk
Connect the camera to a computer using a USB cable.
The camera LCD screen will show disk, camera, charge
for options, short press UP/DOWN button and choose disk
option, short press OK to confirm and enter into U Flash
disk.
8. Playback
In standby mode, short press the mode button twice to
switch to playback mode. Short press the UP/DOWN button
to find the file which needs to playback, short press the OK
button to play it. Short press the Mode button again to exit
playback mode.