JDW EQ748, Руководство по эксплуатации

Страница: 9 / 16

ASSEMBLY
Remove the machine and contents from
the carton. Be sure the carton is empty
before discarding. If you require any
assistance with regards to the contents of
the lawnmower contact us:
Customer Service Team:
0871 231 2000
PROTECTIVE GUARD
CAUTION
Risk of injury! On the under- side of the
protective guard there is a sharp blade
designed to cut the thread. Remove the
transportation protection after mounting.
Put protective guard (4) in place use screws
(12) to fix to the unit.
Remove the transportation protection from
the cutting blade (13).
FRONT HANDLE
Press in and hold the locking buttons (10).
Attach the front handle (11) to the product
as illustrated.
Release the locking buttons (10) again.
OPERATION
DANGER
Risk of injury! The device may only be put
into operation if there are no defects. If a part
is defective it must be replaced before the
device is used again.
WARNING
Risk of injury! Before starting work check the
area and remove all objects which may be
kicked up by the unit.
Check to make sure there are no visible
defects.
Check to make sure all device components
are correctly mounted
CORRECT POSITION
Hold the unit
•
with the left hand on the front handle,
•
and the right hand at approximately hip
level on the operating handle,
•
balanced in a comfortable way.
SETTING THE ANGLE OF THE FRONT HANDLE
Press in and hold the locking buttons (10).
Attach the front handle (11) to the product
as illustrated.
Release the locking buttons (10) again.
SETTING THE LENGTH
Loosen the locking lever (9).
Pull the telescopic pole (14) to the desired
length.
Tighten the locking lever (9).
13
14
12
13
4
10
11
10
11
9
14