ASSEMBLY
ASSEMBLY/PRE-OPERATION
Read these instructions in its entirety before you attempt to assemble and operate your new
lawnmower.
IMPORTANT
: The lawn mower is shipped
WITHOUT OIL OR PETROL
in the engine. Your new lawn mower
has been assembled and tested at the factory and therefore a very small residue of oil could be
noted. Following the engine instructions, to fill the machine with oil & petrol.
REMOVE LAWN MOWER FROM CARTON
Roll the lawn mower out of the carton and check thoroughly for additional loose parts. Please ensure
that you have all the necessary parts.
BRAKE CABLE
To avoid damage during the transport process, the brake cable for your machine may not be fitted
to the handle bar and may need to be fitted before assembling the handle.
ATTACH LOWER HANDLES
The first step when assembling the mower, is to attach the lower handles to the body of the machine
using the small screws supplied.
Ensure that the fixing hole within the lower handle is positioned on the outside so that it accepts the
screw (Fig. 1). After fitting both lower handles, attach the upper handle to the lower handles using the
square neck bolt and handle knob (Fig. 2). Make sure the wing nut is located on the inside of the
handle assembly.