JDS Uniphase OLP-85, Руководство пользователя

Страница: 43 / 88

OLP-85 43
D
ISPLAYING STORED RESULTS
7 M
EMORY
M
ANAGEMENT
4. Press the [
G
] key again every time you want to save a an
additional result value.
The display briefly shows the Fiber ID used.
Notes: If the Fiber ID is not changed, the data set will be saved
under the same title. Depending on the active
application, the Data & Reports can be distinguished by
the Timestamp or a five-digit sequential number. The
Fiber ID can be sorted using the timestamp.
Displaying stored results
To display the last results stored:
√ The homescreen is displayed.
1. Press the [
A
] key.
2. Tap the [ Data ] button.
A selection of the available applications is displayed.
3. Tap the desired application button.
– or –
√ The instrument is in application mode.
1. Press the [
A
] key.
2. Tap the [ More ] button.
3. Tap the [ Data ] button.
The measurement data of the currently selected group is
displayed:
To display the last results stored in Probe mode:
√ The homescreen is displayed.
1. Tap the [ Data ] button.
2. Tap the [ Probe ] button.
Measurement data of the currently selected group is displayed.