J D S L A B S . C O M
4
S E C T I O N 3
O P T I O N S M E N U
Settings
ELEMENT III
SCREEN TIMEOUT
SCREEN CONTRAST
LED MODE
ENCODER RESOLUTION
ENCODER STEPS
2ND HARMONIC COMP
Screen Timeout
Default:
5
seconds, with a range of 0 (never) to 120 seconds.
Screen Contrast
HIGH,
MED
, OR LOW
LED Mode
ON
LEDs will remain on while Element III is on.
WITH SCREEN
LEDs will power off while the screen is off.
5 MIN STANDBY LEDs operate as follows:
y
In S/PDIF mode, the LEDs will always remain on, as audio stream detection is available
only in USB mode.
y
In USB mode, the LEDs will turn off after 5 minutes of audio inactivity*. The LEDs will
turn on:
a. as soon as the USB stream becomes active again, or
b. anytime the screen turns on with user interaction (which is true in any
mode). When the screen turns off, the LEDs will turn off as well only if
the USB stream has remained inactive for 5 minutes.
Pressing down on the Volume Knob for 3+ seconds enters the Options Menu (show below).
Turn the knob to navigate up/down the options menu. Push the knob to make a selection.
Available settings are described below, with default values in
bold
.
Press for 3+ seconds
