JCM DBV 200 Скачать руководство пользователя страница 9

Страница: 9 / 12

DBV

200: DT-004 Downloading

Downloading - Using the JCM DT-004 Download Tool

DO NOT USE the 2-pin connector for power input.

This is output power and can damage the DT-004.

1. Make sure power is applied to the DT-004 via a 3-pin connector

from the PS15-007 power supply with the adaptive harness, Part
No. 400-100067, or the power supply harness connection in the
game.

2. With the power off, be sure the 4MEG Program EPROM is

installed properly.

3. Dip switches: On DBV-200 units, set Dip Switches:

DS1 - #1 to the “On” position, and all others to the “Off” position.
DS2 - All to the “On” position.
DT-004 - All to the “Off” position.

4. Harnessing

•

For standard DBV-200 SS/SH/SU units, use the following JCM
parts:

•

PS15-007 Power Supply, Part No. 550-100040, with adaptive
harness Part No. 400-100067.

•

Harnesses Part No. 400-100065 and 400-100066 for data and
power to the DBV-200 unit.

•

For the B424 model DBV-200, use harness Part No. 400-
100042 in conjunction with harness Part No. 400-100069 to
complete the connection.

5. Turn the power switch on the DT-004 to the “ON” position. The

Power LED should light.

6. Verify the LEDs on the DBV-200 CPU board are illuminated, and

are blinking back and forth. This indicates download mode.

7. To begin the download process, press the “START” button. The

“RDY” LED should begin to blink.

(Cont’d)

Содержание DBV 200












