![background image](http://html2.mh-extra.com/html/jcm/dbv-200/dbv-200_quick-reference-manual_3536926007.webp)
DBV
TM
200: Auto-Calibration
1. Power Off
2. Set DIP Switch DS2: 4,5, and 6 “On.”
DS1
DS2
On
Off
1
2
3
4
5
6
7
8
9 10
1
2
3
4
5
6
Denomination/Interface use
Diagnostic Use
3. Power-on Unit (plug in the 6-pin connector)
4. Head motor will cycle and stop - Ready to Calibrate
5. Insert the DBV-200 calibration paper, black side first (Part No.
057619).
After inserting the calibration paper, the unit will carry the paper for-
ward/reverse several times. When the process is complete, the unit will
return the paper.
Look at the indicator for proper signals: 14-pin Test LED, or the bezel
light, if used. Fast Blinks indicate acceptable calibration, and Blinks from
1-11 at intervals of 1/2 second indicate an error as described below.
# of
Blinks
Error Found
During Calibration
1
Entrance Level Error
3
Entrance Sensor Error
5
Gain Error
White Level Adjustments
6
Digital/Analog Error
White Level Adjustments
7
Barcode Sensor Error
9
Magnetic Setting Error
10
Write-in Error
11
Black Level Error