JCM GLOBAL iVIZION2 Series, Руководство по интеграции

Страница: 23 / 54

P/N 960-000231R_Rev. A © 2022, JAPAN CASH MACHINE CO., LTD.
1 3
Installation iVIZION™2 Series Banknote Validator Foundation of Intelligent Validation Section 3
Settings
Denomination Settings
Interface Settings
Primary LED Indications
The iVIZION2 LEDs illuminate different colors
when various operating and error conditions occur.
Table 10 Denomination Settings (by DIP Switch)
Switch No. ON/OFF Description
1
ON VEND 1 INHIBIT
OFF VEND 1 ACCEPT
2
ON VEND 2 INHIBIT
OFF VEND 2 ACCEPT
3
ON VEND 3 INHIBIT
OFF VEND 3 ACCEPT
4
ON VEND 4 INHIBIT
OFF VEND 4 ACCEPT
5
ON VEND 5 INHIBIT
OFF VEND 5 ACCEPT
6
ON VEND 6 INHIBIT
OFF VEND 6 ACCEPT
7
ON VEND 7 INHIBIT
OFF VEND 7 ACCEPT
8
OFF
*
*. Never Switched to ON.
OFF (Fixed)
Table 11 Interface Settings
Interface ON/OFF
Photo-Coupler
NOTE: The settings may vary based on
Software. Refer to each Country ’s “ Software
Information Sheet” for making the proper
switch settings.
ON
1 2 3 4 5 6 7 8
ON
Validator
DIP Switch
Bottom View
NOTE: No need to set the Interface
Switches for USB and TTL as their circuity
are independent.

For cc-Talk, it is set via the specific
software.
O N
Interface Interface
Switch 1 Switch 2
O N
RS232C
Table 12 Primary LED Indications
Condition
LED Indications
Power LED
*
*. The Power LED lights Green when Power is supplied to the Unit.
Status LED
OFF
OFF OFF
Initializing
Green ON Blue Flashes
Stand-by
Green ON OFF
Reject
Green ON Green Flashes
Banknote Jam
Green ON Yellow Flashes
Abnormal Error
Green ON Red Flashes
ICB Error
Green ON Blue Flashes
PCB Damaged
Green ON White Flashes
Downloading
Green ON
Red Flashes
Green Flashes
Performance Test
(Stand-by)
Green ON Blue ON
Table 11 Interface Settings
Interface ON/OFF
O N
Interface Interface
Switch 1 Switch 2
O N
NOTE: Refer to “Primary LED Indications”
on page 13 for the LED flashing patterns
and how to resolve errors.