JCM GLOBAL iVIZION2 Series, Руководство по интеграции

Страница: 22 / 54

P/N 960-000231R_Rev. A © 2022, JAPAN CASH MACHINE CO., LTD.
1 2
Section 3 iVIZION™2 Series Banknote Validator Foundation of Intelligent Validation Installation
Rear Installation
1. Remove the Cash Box.
2. Put the four (4) UNC6-32 Flat Head Screws into
the back end of the Frame from its inside and
secure the Frame into its intended location using
Nuts.
Security Lock Installation
One or two security locks can be installed onto a
iVIZION2 Cash Box. When installing a security
lock, the following attachment accessories may be
required:
•
Key Spacer
•
Tang
•
KEY CAP (provided)
Choose a Lock that fits a standard size hole dimen-
sion format (Figure 8). In addition, when two locks
are installed, both locks must be identical.
Unlock Procedure
Each Lock has a different rotation direction to
unlock. Make sure when the lock(s) are installed
the rotation is in the correct direction(s) (Figure
10).
Figure 7 Rear Installation
Figure 7 Rear Installation
NOTE: Tightening Torque 80N·cm
Figure 8 Security Lock Installation
Figure 8 Security Lock Installation
2x16.2
2x
φ
19
.1
+0
.1
0
+0
.1 0
Use a Key Spacer if backlash
affects lock/unlock function.
5/8 in. (15
.9mm)
20.5mm
1-1/8 in. (2
8.6mm)
NOTE: The length of each lock indicated
followed standard size.Millimeters in
brackets for inches are only reference.
Lock Hole
Figure 9 Lock Hole Cap Installation
Figure 9 Lock Hole Cap Installation
Use KEY CAP
NOTE: When two locks are to be
installed, both locks must be identical.

When using only one lock, attach a KEY
CAP to the remaining blank hole so that it
won’t provide access to Cash Box
contents.
CAUTION: There are many lock
designs, and Key Spacer washers may
be required for some lock types. Locks
vary greatly in price, security, keying
policies, etc. The customer is
responsible for selecting a Lock with
performance that fits the intended
purpose. JCM does not test or endorse
any specific brand of Lock for its
security characteristics.
Figure 10 Unlock Rotation Direction
Figure 10 Unlock Rotation Direction
5/8 in. or 1-1/8 in. Lock 20.5mm Lock