JCM GLOBAL iVIZION2 Series, Руководство по интеграции

Страница: 32 / 54

P/N 960-000231R_Rev. A © 2022, JAPAN CASH MACHINE CO., LTD.
2 2
Section 5 iVIZION™2 Series Banknote Validator Foundation of Intelligent Validation Preventive Maintenance
Cleaning Procedure
To clean the iVIZION2 Unit’s Sensors, Rollers and
Belts, proceed as follows:
1. Remove electrical power from the iVIZION2
Unit.
2. Remove the Validator and the Cash Box from the
Frame.
3. Clean the Sensors properly.
4. Pressing in on the Upper Guide Access Lever
(Front) and lift the Validation Unit up and open.
5. Clean the Sensors, the Rollers, the Belts and the
Banknote Path properly.
6. Pressing in on the Upper Guide Access Lever
(Rear) and lift the Transport Unit up and open.
7. Clean the Sensors, the Rollers, the Belts and the
Banknote Path properly.
Figure 14 General Cleaning Image
Figure 14 General Cleaning Image
Lens Roller
Before
Cleaning
After
Cleaning
Belt
Dry Lint-free Cloth/Cotton Swab/
Non-flammable Air Jet