Getting Connected
GPRS/3G
Your mobile phone will be automatically configured to use your wireless service
provider’s GPRS/3G/EDGE service (if available) when you turn on the phone for the first
time.
Checking the Network Connection
1.
Touch Menu, then Settings or Settings from the Launcher.
1.
Touch Wireless & networks > Mobile networks.
2.
Touch Network Mode to check the network connection.
Note:
Your mobile phone will automatically read the access point of the SIM card. For this
reason, do not change the parameters of the access point; otherwise, you might not be
able to access network sources.
Turning on the Data Service
1.
From the Settings screen, select Wireless & networks > Mobile networks
2.
Touch the Data enabled check box to turn on the data connection.
Wi-‐Fi
Wi-‐Fi gives you wireless access to broadband Internet access. To use Wi-‐Fi on your
mobile phone, you need to have an access to wireless access points (hotspots).
Obstacles that block the Wi-‐Fi signal will reduce its strength.
Turning On Wi-‐Fi
1.
Touch Menu, then Settings or Settings from the Launcher.
2.
Touch Wireless & networks, and then select the Wi-‐Fi check box to turn on Wi-‐Fi.
Connecting to a Wireless Network
1.
After turning on Wi-‐Fi, touch Wi-‐Fi Settings.
1.
You will see a list of detected Wi-‐Fi networks in the Wi-‐Fi networks section.
2.
Touch a Wi-‐Fi network to connect to it.
If you select an open network, you will be automatically connected to the network.
If you select a network that is secured and connect to it for the first time, enter the
password, and then touch Connect. If you connect to a secured wireless network that
you have already used, you will not be prompted to enter the password again unless
you reset your mobile phone to its default settings.
Tip:
On the Wi-‐Fi settings screen, touch Add Wi-‐Fi network to add a new Wi-‐Fi network.
