CONTROL PANEL - DSE
Operation
Single generator, controlled manually through its genset controller. Load is monitored
by the operator.
Stopping Procedure
Perform the procedure below to stop the generator:
1. To stop the generator, remove any electrical loads.
2. Turn the main power supply MCCB to off position.
3. Press the stop button the generator will now stop after a cool down period .
4. Turn Off the Digital Controller (DC) switch
5. Turn Off battery isolator after a short time period
6. Ensure generator is secured and all doors are locked
18
Please consult your manual for full information or consult your local dealer
IMPORTANT
Before Stopping
1. Check with other personnel on the job site and let them know that
power is being turned off.
2. Make sure that the power shutdown will not create any hazards by
turning off site critical or life safety devices that may need to be kept
on.