JCB, SO53 3LE
www.JCBDIY.com
Customer Helpline 0333 0143092
the blade holder ring anti-clockwise
then lift out the blade (blade could
be spring ejected).
WARNING: Blade teeth are
very sharp.
For best cutting
results ensure you use a blade
suited to the material and cut quality
you need.
6. MOUNTING PARALLEL
GUIDE (See F1, F2)
First slide the parallel guide clamp
(a) and locking knob (b) onto the
parallel guide (15). Then slide the
parallel guide arm through both
parallel guide fixtures and place
the clamp (a) on the fixture. Tighten
the locking knob (b) to achieve
the required cutting distance. The
parallel guide can be mounted in
two positions as shown in F1and F2.
7. ROLLER GUIDE
Ensure the blade is located and
runs smoothly in the groove (See E)
otherwise the pendulum function will
not work correctly and the blade will
not be supported during cutting.
F1
9
G
15
a
b
F2
