JCB, SO53 3LE
www.JCBDIY.com
Customer Helpline 0333 0143092
selection.
Avoid prolonged use at very low
speed as this may damage your
jigsaw’s motor.
Chart 1
Material
Speed setting
Wood
5-6
Metal
3-4
Aluminum
3-5
PVC
3-4
Ceramic
3-5
4. HAND GRIP AREAS
Always ensure you maintain a firm
grip whilst operating your jigsaw.
5. BLADE FITTING
(See C,D,E)
You can only use the blade type
shown in Fig C. To open the blade
holder (13) rotate the ring anti-
clockwise (Jigsaw upside down)
and hold in position (See Fig D).
Then fully insert the blade into the
blade holder slot with blade teeth
facing forward and release the ring,
which will self rotate and clamp
over the top of the blade. Push the
blade into the blade holder again
to ensure it is locked in position.
Ensure the edge of the blade is
located in the groove of the blade
guide (See Fig E). To remove a
blade, holds the blade and rotate
13
D
10
E
C
