JCB, SO53 3LE
www.JCBDIY.com
Customer Helpline 0333 0143092
NOTE:
Before using the tool,
read the safety and operating
manual carefully.
INTENDED USE
The machine is intended for sawing
wood, plastic, metal and building
materials while resting firmly on
the workpiece. It is suitable for
straight and curved cuts with
bevel angles to 45°. The saw
blade recommendations are to be
observed.
1. ON/OFF SWITCH
Depress to start and release to stop
your tool.
2. SWITCH LOCK-ON
BUTTON
Depress on/off switch (1) then lock-
on button (2) (See A), release on/
off switch first then lock-on button
second. Your switch is now locked
on for continuous use. To switch off
your tool just depress and release
on/off switch.
3. VARIABLE SPEED
CONTROL
Adjust the thumb-wheel to increase
or decrease the speed (See B)
according to the material, material
thickness and blade specification
to be used (also possible during
no load operation). See Chart 1
for general guidance on speed
OPERATING INSTRUCTIONS
A
4
B
1 2
