manualshive.com logo in svg

jcb JCB-SDS920, Инструкция по безопасности и эксплуатации

Поделиться
Скачать
jcb JCB-SDS920 Скачать руководство пользователя страница 18

JCB, SO53 3LE
www.JCBDIY.com
Customer Helpline 0333 0143092  

MAINTENANCE

Remove the plug from the socket before carrying out any adjustment, servicing 
or maintenance.

There are no user serviceable parts in your power tool. Never use water or chemical 
cleaners to clean your power tool. Wipe clean with a dry cloth. Always store your power 
tool in a dry place. Keep the motor ventilation slots clean. Keep all working controls 
free of dust. Occasionally you may see sparks through the ventilation slots. This is 
normal and will not damage your power tool.                                  
If the supply cord is damaged, it must be replaced by the manufacturer, its service 
agent or similarly qualified persons in order to avoid a hazard. 

TROUBLESHOOTING

1. If your power tool does not start, check the plug on the power supply first.
2. If your hammer becomes too hot in use, set the hammer switch to the drill mode 
and allow your drill to operate at maximum speed without load for 2 minutes.
3. If your hammer work efficiency is too low, please add sufficient grease in the grease box.
4. If your hammer work efficiency is too low please check drill bit or chisel and make 
sure it is not blunt or worn.
5. If a fault can not be rectified, return the tool to an authorized dealer for repair.

ENVIRONMENTAL PROTECTION

 

Waste electrical products must not be disposed of with household waste. 
Please recycle where facilities exist. Check with your local authorities or retailer 
for recycling advice.

Содержание JCB-SDS920





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды