jcb JCB-SDS920, Инструкция по безопасности и эксплуатации

Страница: 13 / 20

JCB, SO53 3LE
www.JCBDIY.com
Customer Helpline 0333 0143092
fingers don’t get pinched.
After locking, the Rotary Sheath will
return to the initial position. Pull on the
chuck to make sure it has properly
locked itself into place before drilling.
3. ADJUSTING THE
AUXILIARY HANDLE (See C)
For your personal safety we
recommend using the auxiliary handle
at all times.
To adjust the handle, rotate the
bottom of the handle anti-clockwise
and rotate the handle around the
hammer collar until the handle is in
the desired position. Tighten fully.
4. ANTI-VIBRATION HANDLE
The Anti-vibration handle reduces
the vibration, making operation more
comfortable and secure.
5. USING THE DEPTH
GAUGE (See C)
The depth gauge can be used to set a
constant depth to the drill.
Rotate the locking screw (a) anti-
clockwise to loosen, insert the depth
gauge into the handle. Adjust it to the
desired depth. Rotate the locking screw
clockwise to tighten.
6. ON/OFF SWITCH (See D)
Depress the On/Off switch (6) to start
and release it to stop your tool.
D
6
E
b 3
c
H2
11
G
9
10
11
C
a
F
4
H1