JCB, SO53 3LE
www.JCBDIY.com
Customer Helpline 0333 0143092
OPERATING INSTRUCTIONS
NOTE:
Before using the tool,
read the safety and operating
manual carefully.
INTENDED USE
The machine is intended for hammer
drilling in concrete, brick and stone
as well as for light chiseling work. It is
also suitable for drilling without impact
in wood, metal, ceramic and plastic.
1. INSERTING AND
REMOVING DRILL BITS IN
THE SDS-plus CHUCK
Take care that the dust protection
cap is not damaged when
changing tools.
1) INSERTING (See A1)
Clean and lightly grease the bit with
the oil provided before inserting. Insert
the dust-free bit into the bit holder with
a twisting motion until it latches.
The bit locks itself. Check the locking
by pulling on the tool.
2) REMOVING
(
See A2)
Retract back the bit holder locking
sleeve (a) and pull out the bit.
WARNING:Your new WORX
Rotary Hammer Drill
generates powerful forces to
get your job done quickly and
effectively. These forces may
cause inferior quality SDS bits to
break and jam in the chuck,We
therefore recommend that only
A1
A2
a
I
II
b
I
II
B1
b
I
II
B2
Содержание JCB-SDS920
Страница 2: ......
