11
JCB-MS-ST-NA
Instruction & User Manual
CLEANING, MAINTENANCE, STORAGE AND
TRANSPORT
IMPORTANT!
Before any cleaning or maintenance work, the
electrical tool fitted must be switched off and
the mains plug disconnected, or battery pack
removed! Risk of injury!
Cleaning
m
Keep the mitre saw stand as free of dust and
dirt as possible. Rub the mitre saw stand
clean with a clean cloth or blow debris off
with compressed air at low pressure.
m
We recommend that you clean the mitre
saw stand immediately after every use.
m
Clean the stand at regular intervals using a
damp cl
oth and a little soft soap. Do not
use any cleaning products or solvents - they
could attack the plastic parts of the mitre
saw stand.
Storage
ATTENTION!
Store the mitre saw stand only in dry locations.
Do not allow access to the mitre saw stand by
unauthorised persons or children.
Transport
ATTENTION!
!
Do not transport whilst the electric power tool
is running.
Before moving the mitre saw stand, pull out
the mains plug, or remove the battery pack,
of the electric power tool mounted on it! Risk
of injury due to electric shock and unexpected
start-up of the power tool!
Two people can lift the mitre saw stand by its
frame bed in order to move the mitre saw
stand within rooms (do not drag it along the
ground).
If being transported in a vehicle, remove the
electric power tool first. Fold up the legs for
transport.
Ensure that the load is well secured if
transporting the mitre saw stand in a motor
vehicle.
