9
JCB-MS-ST-NA
Instruction & User Manual
The width and height of the workpiece
supports can be adjusted with the star-grip
screws (J, K). (Fig. 6)
Fastening your tabletop machine (Fig. 7)
Different tabletop machines can be fastened to
your mitre saw stand by adjusting the support
arms (B) to the spacing of the mounting holes
on your machine.
m
Place your tabletop machine (e.g. mitre
saw) on the support arms (B) (Fig. 7).
m
Fasten the tabletop machine with 4 coach
screws (F), 4 washers (G), 4 spring washers
(H) and 4 hexagonal nuts (I) on each of the
support arms.
m
Tighten the screws after assembly.
m
Fasten the support arms (B) with the
mounted tabletop machine on the mitre
saw stand, as described on page 8.
If your machine has different hole
spacing for mounting, use the crossbars
(C) provided as an adapter as follows:
m
Position the crossbars (C) on the support
arms (B) and secure them with 4 coach
screws (E), 4 washers (G), 4 spring washers
(H) and 4 hexagonal nuts (I). (Fig. 8-9)
m
Place your tabletop machine on the
crossbars (C). (Fig. 10)
m
Fasten the tabletop machine with 4 coach
screws (F), 4 washers (G), 4 spring washers
(H) and 4 hexagonal nuts (I) on each of the
crossbars (C).
m
Tighten the screws aft
er assembly.
m
Fasten th
e support arms with the mounted
tabletop machine on the mitre saw stand, as
described
on page 8.
Fitting the workpiece supports (Fig. 6-7)
Insert the workpiece support (D) into the
support post (N) of the frame bed and fasten in
place with the star-grip screw (K).
Repeat the above for the other support.
J
D
K
N
6
F
B
G
H I
7
I
H
G
E
8
