JCB, SO53 3LE
www.JCBDIY.com
Customer Helpline 0333 0143092
position.
If saw is accidentally
dropped, lower guard may be
bent. Raise the lower guard with
the retracting handle and make
sure it moves freely and does not
touch the blade or any other part,
in all angles and depths of cut.
b) Check the operation of the
lower guard spring. If the guard
and the spring are not operating
properly, they must be serviced
before use.
Lower guard may
operate sluggishly due to
damaged parts, gummy deposits,
or a build-up of debris.
Lower guard may be retracted
manually only for special cuts
such as "plunge cuts" and
c) "compound cuts." Raise lower
guard by retracting handle and
as soon as blade enters the
material, the lower guard must
be released.
For all other sawing,
the lower guard should operate
automatically.
d) Always observe that the lower
guard is covering the blade
before placing saw down on
bench or floor.
An unprotected,
coasting blade will cause the
saw to walk backwards, cutting
whatever is in its path. Be aware
of the time it takes for the blade to
stop after switch is released.
ADDITIONAL SAFETY
RULES FOR CIRCULAR
SAW
1. Always wear a dust mask,
hearing protection and eye
protection.
2. Only use saw blades
recommended in the
specification.
3. Do not use any abrasive
wheels.
4. Use only blade diameter(s) in
accordance with the markings.
Содержание JCB-CS1500
Страница 2: ......
