background image

JCB, SO53 3LE
www.JCBDIY.com
Customer Helpline 0333 0143092  

20

21

6

4

16

25

24

12

23 22

21

D

3. CHANGING A SAW 

BLADE (See A)

Press the spindle lock button (18), 
and use the spanner (21) provided 
to remove the blade bolt (22) and 
outer flange (23). Rotate lower blade 
guard (13) clockwise and hold 
open using the lower blade guard 
lever (14) whilst changing the saw 
blade (12). Ensure the blade bore 
is located on the inner flange (24) 
and the blade direction arrow points 
in the same direction as the lower 
blade guard (13) arrow. Check the 
blade surface and flanges are clean. 
Depress the spindle lock (18) again 
and re-fit the outer flange (23) over 
spindle (25), and tighten bolt 1/4 
turn more than finger tight. Check 
the blade is securely clamped. 
Warning: blade teeth are very sharp 
and wear gloves. For best cutting 
results ensure you use a saw blade 
suited to the material and cut quality 
you need.

4. DEPTH OF CUT 

ADJUSTMENT

Lift the depth of cut Adjustment 
lever (20) and raise the saw body 
away from the base plate (15). Set 
the depth of cut using the scale (19) 
and push the lever (21) down to lock 
(See D). Always add 3mm to your 
depth of cut so the blade can cut 
through the material.

Содержание JCB-CS1500

























Отзывы: