Positec Australia Pty Limited
Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia
www.jcb-tools.com
Customer Helpline 1300 889 028
7. AUTOMATIC SPINDLE
LOCK (See G)
The automatic spindle lock
allows you to use it as a regular
screwdriver. You can give an extra
twist to firmly tighten a screw,
loosen a very tight screw or
continue working when the battery
energy has expired. For manual
screwdriver purposes, the chuck is
automatically locked when the tool
is off.
8. USING THE LED LIGHT
(See H)
The LED light allows you to keep
a clear view under less illuminated
circumstances. To turn on the light
simply press the on/off switch.
When you release the on/off switch,
the light will go out.
9. DRILLING
When drilling into a hard smooth
surface, use a center punch to mark
the desired hole location. This will
prevent the drill bit from slipping off
center as the hole is started. Hold
the tool firmly and place the tip of the
bit at the point to be drilled. Depress
the switch trigger to start the tool.
Move the drill bit into the workpiece,
applying only enough pressure to
keep the bit rotating. Do not force
or apply side pressure to elongate a
hole.
Tungsten carbide drill bits
H
9
G
D
3
E
A
5
7
B
C1
4
C2
4
F
