![background image](http://html1.mh-extra.com/html/jcb/jcb-cd20li2/jcb-cd20li2_operating-manual_3552827012.webp)
Positec Australia Pty Limited
Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia
www.jcb-tools.com
Customer Helpline 1300 889 028
recharge, slide it back into your tool.
A simple push with slight pressure will
be sufficient.
OPERATION
1. ON / OFF SWITCH (See B)
Depress the On/Off switch (5) to
start and release it to stop your
drill. The on/off switch is fitted with
a brake function which stops your
chuck immediately when you quickly
release the switch.
It is also a variable speed switch
that delivers higher speed and
torque with increased trigger
pressure. Speed is controlled by the
amount of switch trigger pression.
WARNING: Do not operate
for long periods at low
speed because excess heat will be
produced internally.
2. SWITCH LOCK
The switch trigger can be locked in
the OFF position. This helps to reduce
the possibility of accidental starting
when not in use. To lock the switch
trigger, place the rotation control in
the center position.
3. REVERSIBLE (See C1, C2)
For drilling and screw driving use
forward rotation (4) marked “
”
(lever is moved to the left). Only use
reverse rotation marked “
” (lever
is moved to the right) to remove screws
H
9
G
D
3
E
A
5
7
B
C1
4
C2
4
F
H
9
G
D
3
E
A
5
7
B
C1
4
C2
4
F