Positec Australia Pty Limited
Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia
www.jcb-tools.com
Customer Helpline 1300 889 028
OPERATING INSTRUCTIONS
NOTE:
Before using the tool,
read the instruction book
carefully.
INTENDED USE
The machine is intended for driving in
and loosening screws as well as for
drilling in wood, metal and plastic.
BEFORE PUTTING INTO
OPERATION
A) CHARGING THE BATTERY
The battery charger supplied
is matched to the Li-ion battery
installed in the machine. Do not use
another battery charger.
The Li-ion battery is protected
against deep discharging. When
the battery is empty, the machine
is switched off by means of a
protective circuit: The tool holder no
longer rotates.
In a warm environment or after
heavy use, the battery pack may
become too hot to permit charging.
Allow time for the battery to cool
down before recharging.
When the battery pack is charged
for the first time and after prolonged
storage, the battery pack will accept
a 100% charge after several charge
and discharge cycles.
B) TO REMOVE OR INSTALL
BATTERY PACK (See A)
Depress the battery pack release
button (7) to release and slide the
battery pack out from your tool. After
H
9
G
D
3
E
A
5
7
B
C1
4
C2
4
F
