jcb JCB-18BLCD, Руководство по эксплуатации

Страница: 15 / 148

14
JCB-18BLCD
Instruction & User Manual
Replacing Bits/Drills
Never hold the chuck sleeve in one hand
and run the tool to tighten or release
accessories. This risks serious personal injury.
WARNING!
m
Place the tool on a stable surface, for
example a work bench.
m
Open the chuck by holding the chuck sleeve
in a firm grip and turning it anticlockwise
until the chuck jaws open and the accessory
can be inserted. The chuck is designed so
that it can easily be tightened or released
with one hand.
The spindle locks automatically when the
chuck stops rotating.
NOTE
m
Insert the accessory as far as it will go into
the chuck. Point the tool up slightly so that
the accessory does not fall out.
m
Tighten the chuck sleeve clockwise so that
the accessory is gripped firmly by the chuck
jaws.
Check that the accessory is straight, centred
and not askew. If the accessory is not
properly positioned it could fly out when
starting the tool. Check that the chuck jaws
rest on the flat surfaces of the accessory.
NOTE
m
Tighten the chuck until it grips the accessory.
Grip the chuck firmly and turn it clockwise.
Power Switch
m
Press the power switch to start the tool.
The tool has variable speed:
m
Press the power switch to increase the
speed.
m
Release it slightly reduce the speed.
m
Release the power switch to stop the tool.
Direction Selector
Only use the direction selector when the
tool is stopped and the chuck is not rotating.
Otherwise the tool can be damaged.
WARNING!
m
Use the direction selector to switch
between clockwise rotation and
anticlockwise rotation.
m
When the direction selector is in the middle
position the power switch is locked and
cannot be pressed.
m
Always put the direction selector in
the middle position before putting
the tool down
. This reduces the risk of
accidentally starting it.
m
Press in the direction selector with the
arrow pointing to the chuck for rotation to
the right/screwing/drilling.
m
Press in the direction selector with the
arrow pointing away from the chuck for
rotation to the left/unscrewing.
Tool accessories can be very sharp and can
become very hot during use.
WARNING!
High torque tool, use with care.
WARNING!