jcb G625RS, Быстрый старт

Страница: 26 / 32

26 Please consult your manual for full information or consult your local dealer.
Service checks
Oil – Check (Level)
Oil is toxic. If you swallow any oil, do not induce
vomiting, seek medical advice. Used engine oil
contains harmful contaminants which can cause skin
cancer. Do not handle used engine oil more than
necessary. Always use barrier cream or wear gloves to
prevent skin contact. Wash skin contaminated with oil
thoroughly in warm soapy water. Do not use petrol,
diesel fuel or paraffin to clean your skin.
WARNING! Never check the oil
level or add oil with the engine
running. Be careful of hot
lubricating oil. Danger of scalding.
NOTE: Do not exceed the correct level of engine
oil in the sump. If there is too much engine oil, the
excess must be drained to the correct level. An
excess of engine oil could cause the engine speed
to increase rapidly without control.
Engine oil and oil filter change must be completed
in accordance with the service schedules. Failure to
change the oil and filter at the recommended
interval could cause serious engine failure.
1. Stop the engine and allow it to cool.
2. Make the machine safe.
3.
Wait for the oil to drain back into the engine
sump before you take a reading. If not, a false
low reading may be recorded which can
cause the engine to be overfilled.
4. Get access to the engine.
5.
Remove and clean the dipstick.
6. Replace the dipstick.
7. Remove the dipstick.
8. Check the oil level. The oil should be
between the two marks on the dipstick.
9.
If necessary, add more oil:
9.1. Remove the filler cap.
9.2. Add the recommended oil slowly
through the filler point.
9.3. Replace the dipstick.
9.4.
Remove the dipstick.
9.5. Check the oil level, if necessary
add more oil.
9.6. Replace the dipstick.
9.7. Replace the filler cap.