Positec Australia Pty Limited
Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia
www.jcb-tools.com
Customer Helpline 1300 889 028
from the disc (See C-1). For thicker
grinding discs the raised part of the
outer flange is fitted facing towards
the disc to provide improved
support for the disc hole (See C-2).
Always ensure your disc is securely
clamped.
ADJUSTING THE
PROTECTION GUARD
Before any work on the machine
itself, pull the mains plug.
For work with grinding or cutting
discs, the protection guard must
be mounted.
The coded projection (12) on the
protection guard (10/13) ensures
that only a guard that fits the
machine type can be mounted.
Open the clamping lever (11) Place
the wheel guard (10) with coded
projection into the coded groove
on the spindle of the machine head
and rotate to the required position
(working position).
To fasten the wheel guard (10),
close the clamping lever (11).
The closed side of the wheel
guard (10) must always point to
the operator.
OPERATION
Starting Operation
To start the power tool, push the on/
off switch (1) forward.
To lock the on/off switch (1), press
the on/off switch (1) down at the
C-2
C-1