Positec Australia Pty Limited
Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia
www.jcb-tools.com
Customer Helpline 1300 889 028
front until it engages.
To switch off the power tool, release
the on/off switch (1) or, if it is locked,
briefly push down the back of the
on/off switch (1) and then release it.
(See D)
OPERATING INSTRUCTIONS
•
Clamp the workpiece if it does
not remain stationary due to its own
weight.
•
Do not strain the machine so
heavily that it comes to a standstill.
•
Grinding and cutting discs
become very hot while working; do
not touch until they have cooled.
•
Pull the plug from the socket-
outlet when not using the
machine.
With the plug inserted and
mains voltage existing, the power
tool still has low power consumption
even when it switched off.
1. HAND GRIP AREAS
Always hold your angle grinder
firmly with both hands when
operating (See E).
2. ROUGH GRINDING
The best roughing results are
achieved when setting the machine
at an angle of 30° to 40°. Move
the machine back and forth with
moderate pressure. In this manner,
the workpiece will not become too
hot, does not discolour and no
grooves are formed.
WARNING! Never use a
cutting disc for roughing.
D
E