manualshive.com logo in svg

jcb 8026 CTS, Руководство оператора

Поделиться
Скачать
jcb 8026 CTS Скачать руководство пользователя страница 156

Operation

Getting the Machine Moving

138

138

9811/9950-1

Getting the Machine Moving

Operating Practices

The machine does not have gears. Do not overwork the
engine unnecessarily. Operate at an engine speed suitable
for the duty being carried out.

Note: Too low an engine speed may result in lack of dipper
control.

When moving the machine, keep it under control at all
times. Stay alert for obstructions and possible hazards.
Approach deep mud slowly.

!M

WARNING

Do not dismount a moving machine.

3-2-3-12

Take particular care when reversing. Ensure that the way
behind is clear before reversing.

!M

WARNING

Should the machine start to roll over, you can be
crushed if you try to leave the cab. If the machine
starts to roll over, do not try and jump from the cab.
Stay in the cab, with your seat belt fastened.

INT-2-1-12

HE Services

Содержание 8026 CTS













































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды