9
DUsTBAg
Changing the dustbag
If suction power is reduced or if the ‘dustbag
full’ indicator
Á
is permanently fully red, the
dustbag needs changing. Also, check whether
the suction hose, tube or nozzle are blocked.
To access the dustbag, press the dust
compartment release lever
‹
to open the
cover
J
.
1.
Pull the tab on the dustbag to one side so
that the opening is hygienically sealed
K
.
2.
Pull out the dustbag holder
fl
and
dustbag in an upward direction
L
.
3.
Pull the bag
fi
sideways out of the holder
fl M
.
4.
Dispose of the bag with your household
waste.
5.
Insert a new dustbag in the holder.
6.
Replace the dustbag holder and close the
cover.
NOTE:
If a dustbag is not fitted, the
cover will not close. This is a safety
feature.
FIlTeRs
Cleaning the motor protection filter
NOTE:
Never use the appliance
without the motor protection filter
installed, otherwise damage to the
motor may occur which would not
be covered by the guarantee.
1.
Slide the filter upwards to remove
N
.
2.
Shake or gently brush the filter to clean.
The filter may also be washed in cool
water but must be fully air-dried before
re-fitting.
3.
Refit with the foam side of the filter
towards the dustbag.
J
K
L
M
N